• Home
  • /Posts Tagged ' DL105 '

Archives

AutomationDirect Releases DirectSOFT6

AutomationDirect Releases DirectSOFT6

AutomationDirect’s DirectSOFT6 PLC programming software, the 32-bit Windows certified programming software for the entire DirectLOGIC line of PLCs, provides faster status updates and contains many new and upgraded features to make ladder logic programming faster and easier. DirectSOFT6 includes over 40 additional “IBoxes”. The popular packetized fill-in-the-blank style instructions (compatible with DirectLOGIC DL05, DL06, D2-250-1, ... Read More
 
Bio Diesel Fuel Gets a Boost from Automation

Bio Diesel Fuel Gets a Boost from Automation

Systems produce bio diesel for a total cost as low as 67 cents per gallon, turning waste into profit. Imagine if restaurants and other commercial food enterprises could turn used kitchen oil into fuel instead of simply disposing of it. Then imagine if they could do that in an economic and automated way for a ... Read More
 
“Starting With Steppers” Part One of a Two-Part Series

“Starting With Steppers” Part One of a Two-Part Series

You’ve determined that an open-loop motion control system will handle the accuracy and requirements of your application and therefore you have chosen to use a SureStep Stepping System. The following is a complete reference to the technical information available at this time from AutomationDirect which can aid you in understanding and selecting components and determining ... Read More
 
FAQs for SureServo AC Servo Drives

FAQs for SureServo AC Servo Drives

Since the release of the SureServo AC servo drives, we have compiled a list of questions that are frequently asked by our customers. The following are answers to some of those questions. What power voltages does the SureServo require?  The SureServo requires 220 VAC single-phase to power the smaller drives and 3-phase for larger systems. There ... Read More