AutomationDirect adds 22-Gauge Machine Tool Wire
NewsPress ReleasesPress Releases

AutomationDirect adds 22-Gauge Machine Tool Wire

Insulation type MTW machine tool wire is now available in 22-gauge from AutomationDirect. Existing MTW wire sizes are 20 AWG to 10 AWG. The 22 AWG wire offers an 8% smaller diameter with a 3 amp 600-volt rating which is needed for many types of terminal block connections that cannot accept larger wire. MTW wire…
Contrinex Extended-protection Safety Light Curtains from AutomationDirect
NewsPress ReleasesPress Releases

Contrinex Extended-protection Safety Light Curtains from AutomationDirect

AutomationDirect has added new Contrinex slim-profile safety light curtains, used for human protection and product/machine safety, to its extensive Safety Products lineup.  The new Contrinex 14mm and 30mm beam resolution extended-protection, slim-profile safety light curtains eliminate blind spots (the height of the light curtain is the height of the protected area) and the slim low…
STEGO Enclosure Products from AutomationDirect
NewsPress ReleasesPress Releases

STEGO Enclosure Products from AutomationDirect

44 new STEGO part numbers have been added to AutomationDirect’s enclosure thermal management and enclosure lighting product lines. New STEGO enclosure products include a “Smart Sensor” temperature/humiditysensor, a unique flat form factor heater, enclosure door switches, and new Varioline series LED enclosure lights. The compact Smart Sensor ($126.00) electronically measures temperature and humidity and converts…
High Flex Continuous Flexing Control Cable from AutomationDirect
NewsPress ReleasesPress Releases

High Flex Continuous Flexing Control Cable from AutomationDirect

igus CF9 and CF10 series multi-conductor control cables for continuous flexing applications are available in sizes from 20AWG to 14AWG, with three to seven unshielded (CF9 series) or four and five shielded (CF10 series) conductors. A green-yellow insulated ground conductor is included in the conductor count of each cable. Individual conductors are bare copper and…
IDEM Non-Contact Guard Locking RFID Coded Safety Switches from AutomationDirect
NewsPress ReleasesPress Releases

IDEM Non-Contact Guard Locking RFID Coded Safety Switches from AutomationDirect

IDEM non-contact RFID coded safety switches from AutomationDirect are designed to provide interlock protection on hinged, sliding or removable guard doors. These switches are particularly advantageous when poor guard alignment exists, when high-level anti-tamper is required, where high-hygiene requirements exist (food industry hose down applications) or where long mechanical life is required. When used in…
AutomationDirect adds Inductive Linear Position Transducers
NewsPress ReleasesPress Releases

AutomationDirect adds Inductive Linear Position Transducers

Linear Variable Inductance Transducers (LVITs) from Alliance Sensors Group convert the linear displacement of an object into a proportional electrical signal output of 0-10V or 4-20mA (depending on model). LVITs are contactless devices designed for dimension or position measuring applications where the sensing element cannot be attached to the object being measured. LVITs exhibit outstanding…
NITRA Pneumatic Air Preparation Filters, Regulators, Lubricators from AutomationDirect
NewsPress ReleasesPress Releases

NITRA Pneumatic Air Preparation Filters, Regulators, Lubricators from AutomationDirect

AutomationDirect NITRA® pneumatic air filters, air regulators, air lubricators, air relief valves and combination air filters/regulators are now available with larger gauges and a new easy quarter-turn twist off feature. These air preparation units are available in a wide variety of port sizes to meet a broad range of pneumatic air supply filtration, air regulation…